Scientists have found a novel way to purify drinking water quickly and efficiently using graphene oxide and sunlight, an advance that may be a game changer for countries such as India.
"We hope that for countries where there is ample sunlight, such as India, you'll be able to take some dirty water, evaporate it using our material, and collect fresh water," said Mr. Srikanth Singamaneni, associate professor at Washington University.
The new approach combines bacteria-produced cellulose and graphene oxide - hailed as a wonder material - to form a bi-layered biofoam.
"The nanoscale cellulose fibre network produced by bacteria has excellent ability to move the water from the bulk to the evaporative surface while minimising the heat coming down, and the entire thing is produced in one shot," said Mr. Singamaneni.
"You have a bi-layered structure with light-absorbing graphene oxide filled nanocellulose at the top and pristine nanocellulose at the bottom," he said.
"When you suspend this entire thing on water, the water is actually able to reach the top surface where evaporation happens," he added.
"Light radiates on top of it, and it converts into heat because of the graphene oxide - but the heat dissipation to the bulk water underneath is minimised by the pristine nanocellulose layer," said Mr. Singamaneni.
"You don't want to waste the heat; you want to confine the heat to the top layer where the evaporation is actually happening," he said.
The cellulose at the bottom of the bi-layered biofoam acts as a sponge, drawing water up to the graphene oxide where rapid evaporation occurs.
The resulting fresh water can easily be collected from the top of the sheet.
The process in which the bi-layered biofoam is actually formed is also novel.
In the same way an oyster makes a pearl, the bacteria forms layers of nanocellulose fibers in which the graphene oxide flakes get embedded.
"While we are culturing the bacteria for the cellulose, we added the graphene oxide flakes into the medium itself," said Qisheng Jiang, a graduate student in the Singamaneni lab.
"The graphene oxide becomes embedded as the bacteria produces the cellulose. At a certain point along the process, we stop, remove the medium with the graphene oxide and reintroduce fresh medium," said Jiang.
"That produces the next layer of our foam. The interface is very strong; mechanically, it is quite robust," he said.
The new biofoam is also extremely light and inexpensive to make, making it a viable tool for water purification and desalination.
"Cellulose can be produced on a massive scale, and graphene oxide is extremely cheap - people can produce tonnes of it," Mr. Singamaneni said.
"The properties of this foam material that we synthesised has characteristics that enhances solar energy harvesting," said Mr. Pratim Biswas, professor at Washington Univsersity.
The research appears in the journal Advanced Materials.
(This story has not been edited by NDTV staff and is auto-generated from a syndicated feed.)
"We hope that for countries where there is ample sunlight, such as India, you'll be able to take some dirty water, evaporate it using our material, and collect fresh water," said Mr. Srikanth Singamaneni, associate professor at Washington University.
The new approach combines bacteria-produced cellulose and graphene oxide - hailed as a wonder material - to form a bi-layered biofoam.
"You have a bi-layered structure with light-absorbing graphene oxide filled nanocellulose at the top and pristine nanocellulose at the bottom," he said.
Advertisement
"Light radiates on top of it, and it converts into heat because of the graphene oxide - but the heat dissipation to the bulk water underneath is minimised by the pristine nanocellulose layer," said Mr. Singamaneni.
Advertisement
The cellulose at the bottom of the bi-layered biofoam acts as a sponge, drawing water up to the graphene oxide where rapid evaporation occurs.
Advertisement
The process in which the bi-layered biofoam is actually formed is also novel.
Advertisement
"While we are culturing the bacteria for the cellulose, we added the graphene oxide flakes into the medium itself," said Qisheng Jiang, a graduate student in the Singamaneni lab.
Advertisement
"That produces the next layer of our foam. The interface is very strong; mechanically, it is quite robust," he said.
The new biofoam is also extremely light and inexpensive to make, making it a viable tool for water purification and desalination.
"Cellulose can be produced on a massive scale, and graphene oxide is extremely cheap - people can produce tonnes of it," Mr. Singamaneni said.
"The properties of this foam material that we synthesised has characteristics that enhances solar energy harvesting," said Mr. Pratim Biswas, professor at Washington Univsersity.
The research appears in the journal Advanced Materials.
(This story has not been edited by NDTV staff and is auto-generated from a syndicated feed.)
COMMENTS
Advertisement
Can Lunar Ice Quench Astronauts' Thirst? This Contest Seeks Solutions To Purify Moon Water Wait, What? This Belgian Restaurant Serves Drinking Water Recycled From Toilets Indian Tree Moringa Oleifera's Seeds Can Bring Water To Millions: Study Life On Earth Originates From One Ancestor, Older Than Previously Believed Send Reports Every 2 Hours: Centre To States On Kolkata Horror Protests Siddaramaiah's Swipe At Governor Amid Calls For Resignation: 10 Points 7 Magnitude Earthquake Strikes Off Russia, Tsunami Warning Issued Prohibitory Orders In Kolkata Amid Protests Over Doctor's Rape-Murder Gaza Records First Polio Case In 25 Years As UN Urges Vaccinations Track Latest News Live on NDTV.com and get news updates from India and around the world.